Notifier Verifire Tools Programming Manuals
CLICK HERE ->>> https://tinurll.com/2tucx8
How to Use Notifier VeriFire Tools for Fire Alarm Programming
Notifier VeriFire Tools is a software application that allows you to program, configure, and test Notifier fire alarm panels. It supports a variety of Notifier devices, such as network control panels, intelligent sensors, and audio/visual devices. With Notifier VeriFire Tools, you can create and edit fire alarm programs, upload and download programs to and from panels, and perform diagnostics and troubleshooting.
In this article, we will show you how to use Notifier VeriFire Tools for fire alarm programming. We will cover the following topics:
How to install and launch Notifier VeriFire Tools
How to create a new fire alarm program
How to add and configure devices in the program
How to upload and download programs to and from panels
How to test and verify the program
Before we begin, make sure you have the following requirements:
A computer running Windows 7 or later
A USB or serial cable to connect the computer to the panel
A Notifier fire alarm panel compatible with Notifier VeriFire Tools
A Notifier VeriFire Tools license key
How to Install and Launch Notifier VeriFire Tools
To install Notifier VeriFire Tools, follow these steps:
Insert the Notifier VeriFire Tools CD-ROM into your computer's CD drive.
Open the CD drive folder and double-click on the setup.exe file.
Follow the on-screen instructions to complete the installation.
When prompted, enter your license key and click OK.
Restart your computer if required.
To launch Notifier VeriFire Tools, follow these steps:
Connect your computer to the panel using the USB or serial cable.
Turn on the panel and wait for it to initialize.
On your computer, click on the Start menu and select All Programs > Notifier > VeriFire Tools.
The Notifier VeriFire Tools main window will open.
How to Create a New Fire Alarm Program
To create a new fire alarm program, follow these steps:
In the Notifier VeriFire Tools main window, click on the File menu and select New.
A dialog box will appear asking you to select a panel type. Choose the panel type that matches your panel and click OK.
A new program window will open with a default name and settings.
To change the name of the program, click on the Program menu and select Rename. Enter a new name and click OK.
To change the settings of the program, such as date and time format, language, password, etc., click on the Program menu and select Settings. Make the desired changes and click OK.
To save the program, click on the File menu and select Save. Choose a location and a file name for your program and click Save.
How to Add and Configure Devices in the Program
To add and configure devices in the program, follow these steps:
In the program window, click on the Devices tab. You will see a list of available devices for your panel type.
To add a device, drag and drop it from the list to the desired location on the program map. You can also right-click on an empty location on the map and select Add Device. A dialog box will appear asking you to choose a device type. Select a device type and click OK.
To configure a device, double-click on it or right-click on it and select Properties. A dialog box will appear showing the device properties. You can change the device address, label, options, parameters, etc. Make the desired changes and click OK.
To delete a device, right-click on it and select Delete. A confirmation message will appear. Click Yes to delete the device.
To copy or move a device, right-click on it and select Copy or Cut. Then right-click on another location on the map and select Paste. a474f39169